The installation methods of worm gear reducer mainly include horizontal and vertical.
First of all, the horizontal installation method is to place the reducer horizontally on the foundation, with the output shaft and the input shaft of the transmission device on the same horizontal line. This installation method is suitable for places with relatively spacious space. It has the characteristics of small floor area, easy maintenance and high transmission efficiency. In horizontal installation, care should be taken to ensure that the foundation of the reducer is solid and flat and can withstand its weight and vibration during operation. During installation, bolts should be used to firmly connect the reducer to the foundation to ensure its stability.
Secondly, the vertical installation method is to install the reducer vertically on the foundation, and the output shaft is vertically arranged with the input shaft of the transmission device. This installation method is suitable for places with limited space or where vertical transmission is required. It has the characteristics of saving space and withstanding greater transmission intensity. In vertical installation, attention should be paid to ensuring the verticality of the reducer to avoid problems caused by eccentricity.
In addition, the installation steps of the worm gear reducer include: fixing the bearings at both ends of the turbine and installing oil seals, placing the turbine into the lower box, covering the upper box and ensuring that sealant or sealing is applied between the box interfaces Pad, compress the box and check whether the turbine is offset. If it is offset, it needs to be adjusted. During the installation process, attention should also be paid to testing the sealing of the reducer to ensure its normal operation.
